Topic Options
Rate This Topic
#43780 - 04/15/99 12:04 PM pinout for mini din?
DanHarr Offline
New Member

Registered: 04/15/99
Posts: 2
Loc: Washington, DC
Hi-
I was planning to make a cable to download the DA7 update... I've got the diagram from Panasonic for the adaptor cable, but I don't know the numbers for the individual pins on the 8 pin mini din plug. They are printed on the PC side, however... Anyone got a diagram or site that shows this? Thanks-

Top
#43781 - 04/15/99 01:16 PM Re: pinout for mini din?
Skingswizo Offline
New Member

Registered: 04/15/99
Posts: 1
Loc: NY NY USA
I too had this problem of knowing which pin was which. Upon closer inspection, I could see that the mini-din was indeed labelled.
You may need a magnifying glass to read them

Top
#43782 - 04/15/99 06:13 PM Re: pinout for mini din?
gregk Offline
Senior Member

Registered: 04/15/99
Posts: 789
I have the miniDIN8 pin numbers in a diagram downloadable from my website.

http://www.dynamicproductions.com/DOWNLOAD/miniDIN8.jpg

Top
#43783 - 04/15/99 06:41 PM Re: pinout for mini din?
gregk Offline
Senior Member

Registered: 04/15/99
Posts: 789
I also now have the pin diagram of a 9-pin cable

http://www.dynamicproductions.com/DOWNLOAD/9pin.jpg

The 9 pin parts are available from Radio Shack. You'll need a connector and a hood. The best and cheapest way to get the miniDIN8 is to cut the end off a Mac printer cable and solder this to the 9pin.

- Greg Klas

Top
#43784 - 04/15/99 09:16 PM Re: pinout for mini din?
DanHarr Offline
New Member

Registered: 04/15/99
Posts: 2
Loc: Washington, DC
Thanks!

Top



Ads and Reviews



Justin's Product Reviews: