Page 2 of 2 < 1 2
Topic Options
Rate This Topic
#39977 - 04/21/99 08:17 PM Re: Major Problems w/Talkback for post
erik f Offline
New Member

Registered: 04/16/99
Posts: 8
Loc: san francisco, ca, usa
I've also noticed that the slate mic opens before the monitors dim.

Thus when using the "slate" option, the engineer and others present in the control room get a pleasent little feedback "boop" for about .5 sec until the monitors dim. It Happens everytime, and all inputs have been turned off manually just to be sure I'm not creating any type of loop

Top
#39978 - 04/22/99 04:27 AM Re: Major Problems w/Talkback for post
Eric Seaberg Offline
Veteran Member

Registered: 04/15/99
Posts: 1836
Loc: San Diego, CA USA
What I do is have a seperate mic for the director/producer which is patched into an unused Mic input on the console. It's level is always up but signal only goes to an Aux send, pre-fader, so the talent can ALWAYS hear the producer... then you only hit TALKBACK to slate the take.
_________________________
ERIC SEABERG • San Diego, CA
A.E.S., I.E.E.E., S.M.P.T.E., S.P.A.R.S.

Top
Page 2 of 2 < 1 2



Ads and Reviews



Justin's Product Reviews: