What you might tell him is to run S/PDIF from the DA7 for the Wavecenter to clock to (using 75 Ohm video cable). There's a simple setting in the Wavecenter control panel to tell it where to gets its clock.

It's never a good idea to use the embedded clock in lightpipe, but lightpipe is very convenient for carrying audio.

By the way, I have three Wavecenters clocked to S/PDIF. I picked up a video distribution amp on eBay to give me more S/PDIFs.

Everything in the life ends up being known; for this reason it is very beautiful to walk in the truth. And the truth is good as good it is its observation and its healthy question.

Certainly my first questions were written by my son that speaks and he/she writes the English language well (It was worthwhile to put it to study English) but he/she works in another city and he/she comes the weekends. Me but or fewer understand reading. for that reason my aid scream so that people that speaks Spanish are integrated to the page DA7 and I can to write without using a translating sofware like the one that now am using. My friendship for you and that God blesses him largely

Receive my greetings. I paid him attention and I am also using a translating sofware. My son knows the English language and he asked me the first questions, but the one comes the weekends. Well I believe that I didn't know how to explain to myself. lo que en principio deseo es instalar el sofware DA7. They gave it to me in a flexible disk but I suppose that the computer should indicate that there is a new harware but this doesn't happen. I tell him what was in the disk: Ransa 2.01. qic, File QIC 1422KB. I also kept the upgradeDa7 that I got off internet. He/she would want to taste step like step since I place the cable and where place it (din or DB9). I should say that the cable is not original. I built it copying the connections that he/she gave me the old owner of the DA7 who needed the original cable. He sends me via internet the indications using a tester. He/she would know how to thank if he/she sent me the diagram for chequear. For example pin 2 of the DIn to the pin 4 of the DB9 etc. My mini Din doesn't have numbers and my friend indicated me with a drawing. God blesses him and he/she keeps him

Hi allí, pensé que usted intentaba conectar su soundcard con su DA7. Ahora entiendo que usted está intentando conectar su PC con su DA7. Pienso que usted está intentando aumentar la versión del programa de su DA7. ¿Está eso correcto? Para hacer esto usted necesita un cable especial que tenga un DB9 en un extremo para la conexión al puerto serial de la PC y 8 un perno mini dinar en el otro extremo a conectar con el Da7. Estos cables son hechos por Hosa y usted puede encontrar los detalles en este acoplamiento http://www.hosatech.com/hosa/products/DBK-100.html Con el cable correcto usted debe descargar, traducir y seguir las instrucciones excelentes de la mejora del documento DA7 2.01. Esto es una forma avaiable del archivo del pdf que los recursos seccionan del sitio de DA7.com. Usted también necesitará descargar la utilidad de la mejora en esta sección. Si he entendido su problema, después usted debe ahora tener la solución. Sin embargo si no he entendido su problema, después déjeme por favor saber e intentaré ayudar a mayor. Buena suerte. Lizardpoint

Lizardpoint. Thank you to help me. I manufactured the cable and I believe that it is well. I compared it with a diagram that I got off the part cable and conexiones"de web siteDA7. Of there I also lowered the bring up to date that you indicate me. I have followed all the instructions of the manual one but I don't achieve that the serial stall I/O setup port selec baud rate is activated. I believe that my error is in that cannot activate port COM. I don't know as making it and it always leaves me an error message TO communication error ocurred. Confirm the cable connection." Tell me another thing: can the DA7 of controller of the faders serve as SOUNDING? I thank him a lot their interest in helping me.That God protects him!