Topic Options
Rate This Topic
#146412 - 02/12/15 02:31 AM No sound from SPDIF
Thalilboyz Offline
New Member

Registered: 02/11/15
Posts: 9
Loc: France
Hello this is the first time I post on the site. I have a problem with setting the table. I explain I have a Motu 2408 mk3 card and DA7 ramsa 3 TDIF cards. I set the port 3 of the motu SPDIF to send the sound of the Motu Ramsa in (Send / Return) 1/2. I am on Ramsa signal that shows me that the sound is perceived but I have no sound comes out. Does that sound should come out by the Master L / R TDIF or the SPDIF back of the Motu?
I do not know if I explained well but I do not know anything yet about setting the Ramsa.
thank you


Edited by Thalilboyz (02/12/15 01:03 PM)
_________________________
ThalilboyzBeats

Top
#146429 - 02/20/15 03:04 PM Re: No sound from SPDIF [Re: Thalilboyz]
Thalilboyz Offline
New Member

Registered: 02/11/15
Posts: 9
Loc: France
i finally found how to resolve this problem. for everybody if your DA7 don't play sound out replace the 3 fuses 6.3A of the PCB.
_________________________
ThalilboyzBeats

Top
#146808 - 03/03/19 02:48 AM Re: No sound from SPDIF [Re: Thalilboyz]
DiscToPunk Offline
New Member

Registered: 03/03/19
Posts: 2
Thank you for posting this, as I'm a new user running into this issue, I was operating under the most likely premise- user error.

Top



Ads and Reviews



Justin's Product Reviews: