I have a reverb unit setup on aux sends/return 5/5. I'm trying to send the wet signal out individualy via 1-8 as I am using 1-8 pres for drums. In other words O want to add the individual reverb amounts from the aux sends and returns out of adat card 1-8. Problem is they are all dry compression and eq work. What do O need to do the manual is stark and non existant.

My second question has to do w master/slave wordclock

My focusrite 8pre has only wordclock out. So it can't be a slave? The wordclock must be sent via the lightpipe because I have the 8pre set to adat and it works. The recorded gain level is rather low or lower. I love the sound of the board eq, compressor, gates are sweet and I'm just now after some major acoustics updates to my rooms and wiring getting down to using it as intended for drums and multiple que mixes in 4x different rooms. Sorry for spelling typing on an iphone.