Hi there,
some days ago i was lucky to get a RAMSA D7,

Now, since today i got 2 DA7-ADAT cards, built in my RAMSA.
They do appear in the I/O menue, but in the lower left, the slot fields are all crossed by a line. And it looks like:

SLOT 1 (crossed) ADAT UNLOCK

i connected the ADAT cable to it, (from the out of the DA7-unit to the in of an apollo twin),and set the channels to the Adat-Channels. Now it works, but the SLOTS are still crossed by a line...how can i unlock the slots




Any advice would be wonderful from you guys!

cheers
neo